Sheet
We supply customised flat steel sheets in various formats, for example formwork, fabrication shops or other areas of application. Please contact Peter van Vugt or Gregory Rombaut if you would like advice on the quality you are looking for or specific finishing operations.
Qualities
The following qualities are the most commonly supplied:
- Hot rolled pickled: DD11 to D14, S185 to S700
- Sendzimir galvanised: DX51 to DX57, S220 to S550, HX180 to HX700 and Z050 - Z275
- Magnesium Zinc: DX51 to DX57, S220 to S550, HX180 to HX700 and ZMA050 - ZMA275
- Cold-rolled: DC01 to DC06, HC260 to HC420
- Aluzinc: DX51D+AZ to DX54D+AZ, S220GD+AZ to S550GD+AZ, H220YD+AZ to HX420LAD+AZ
- Electrolytic galvanised: DC01+ZE to DC07+ZE, HC260LA+ZE to HC420LA+ZE
- Aluminised: DX51, AS120
- Pre-finished, such as: polyester, plastisol
- RVS FE430, 304_2B, 316_2B
Is your desired quality not among them? Please contact us directly!
Sizes
We can supply you sheets in the following sizes.
Sheet sizes:
- Small: 2,000 * 1,000
- Medium: 2,500 * 1.250
- Large: 3,000 * 1.500
Deviating sizes are possible. Please contact us for this.
Sheet thickness:
- 0.3 mm - 8.0 mm
Thickness tolerances follow EN standards, more accurately is possible in consultation.
Sheet width:
- Minimum width: 100 mm, depending on thickness band
- Maximum width: 1,500 mm
- Width tolerance: -0/ +6 mm
Packaging
In accordance with your wishes and requirements, your shipment will be packed in such a way that it reaches its destination undamaged allowing your production process to continue without interruption. The maximum pallet weight for the sheets is 3 tons. We can also take care of the export packaging for you. We can also customised packaging. Please contact us for more information.
